Advantech Automation1 XC4, Hardware Manual

Page: 98 / 120

3.4. Analog Inputs [-EB1]
To interface to a single-ended, non-differential voltage source, connect the signal common of the source
to the negative input and connect the analog source signal to the positive input. A floating signal source
must be referenced to the analog common. Refer to
Figure 3-9 .
Table 3-14: Differential Analog Input Specifications [-EB1]
Specification Value
(AI+) - (AI-)
+10 V to -10 V
(1)
Resolution (bits) 16 bits
Input Impedance 1 MΩ
1. Signals outside of this range may damage the input
Table 3-15: Analog Input Connector Pinout [-EB1]
Pin# Description In/Out/Bi
Connector
1 +5V (250 mA max) N/A
2 Analog Input 1+ Input
3 Analog Input 1- Input
4 Analog Input 2+ Input
5 Analog Input 2- Input
6 Analog Input 3+ Input
7 Analog Input 3- Input
8 Ground N/A
Table 3-16: Mating Connector Part Numbers for the Analog Input Connector [-EB1]
Mating Connector Aerotech P/N Third Party P/N
Wire Size: mm
2
[AWG]
8-Pin Terminal Block ECK02397 Phoenix 1908101 0.5 - 0.14 [20-26]
Figure 3-9: Analog Input Typical Connection [-EB1]
3.4. Analog Inputs [-EB1] XC4 Hardware Manual
98 www.aerotech.com