Advantech ADAM 4100, User Manual, Page: 69 / 155

Chapter
4
Chapter 4 Command Set 4-29
4.4.18
$AAFQm
Name
Locate the module
Description
This command light the LED to help user to know which
model is Located
Syntax
#AAFQm(cr)
# is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address which is to be read.
FQ represents the lighting of the LED for locating a specific
model.
m: 1 LED Turn ON(10 seconds)
0 Clear Locate
(cr) is the terminating character, carriage return (0Dh).
Response
>AA (cr) if the command was valid.
?AA(cr) if an invalid operation was entered.
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
> is a delimiter character indicating that a valid command
was received.
? is a delimiter character indicating that the command was
invalid.
AA (range 00-FF) represents the 2-character hexadecimal
address of the analog input module.
(cr) represents terminating character, carriage return
(0Dh).
Example
command: $01FQ1(cr)
response: >01 (cr)
The command at address 01 of the module lights up the
“Status LED” for 10 seconds.