Advantech ADAM 4100, User Manual, Page: 120 / 155

A-10 ADAM 4100 Series User’s Manual
Appendix A
V(input signal)
The input signal of Channel 1
V2=0.7
V1=0.2
T1 T2 Time
2.1 The condition of channel 1 is input range +/- 1V and filter 20%
2.2 20% of FSR(full scale range) means 0.4V
2.3 The time interval T1~T2 equals to sampling time
2.4 Conclusion is the difference between V1@ T1 and V2@T2 is
0.7-0.2 =0.5V > 0.4V, so signal V2 will be ignored
If you want to locate specific ADAM-4100 series, the
configuration utility provides a “Locate” function to assist you. When you
select a specific device, the LED that represents “Status” will be
flashing for 8 minutes. If the “Locate” button is clicked, the “Status”
LED will stay on. If the “UnLocate” is clicked, the “Status” will remain
default status.
Figure A-11 Located mode Function