manualshive.com logo in svg

ADTRAN Total Access 3010, System Manual, Page: 9 / 511

Share
Download
ADTRAN Total Access 3010 System Manual Download Page 9

6TASYS101-1E

TOTAL ACCESS 3000/3010

SYS-101

Page 3 of 46

Total Access

®

 3000/3010 System Manual

© 2003, ADTRAN, Inc.

1.

SYSTEM OVERVIEW

1.1 General Overview

ADTRAN’s Total Access 3000/3010 is an intelligent access platform that integrates
ADTRAN’s industry leading loop technologies into a single platform. Total Access
3000/3010 has unparalleled reliability, flexibility, provisioning, protection, and
management capabilities. It is designed to deploy today’s advanced loop technologies
and those of the foreseeable future, as well as support all existing technologies.

Current offerings for the Total Access 3000/3010 include STS-1, OC-3, DS3, HDSL,
HDSL2, T1, ISDN, Optical Delivery of four T1s, and a System Controller Unit. The
entire system is designed for simplicity, service, compatibility, and functionality.

The Total Access 3000/3010 open-architecture backplane delivers highly reliable
services across a large number of interfaces. It is also well suited for Remote
Terminal (RT) and Multi Tenant Unit (MTU) deployment because it is temperature
hardened and requires only 6 inches of rack space. In addition, ADTRAN’s Total
Access EMS (Element Management System) provides a  full range of network
management features and a CORBA interface for OS integration.

1.2 Features and Benefits

•

Total Access 3000/3010 will easily integrate future technologies

•

Compact size allows for reduced space requirements

•

Fully hardened for RT Deployment

•

Full NEBS Level 3 and UL Certifications

Summary of Contents for Total Access 3010
































































































































































































































































































































































































































































































































Reviews:

No comments