Total Access
®
3000/3010 System Manual
6TADLP744-1E
TOTAL ACCESS 3000/3010
DLP-744
Page 7 of 12
© 2003, ADTRAN, Inc.
Perform Steps Below in the Order Listed
8.
Provision OC-3 List 2 MUX in the Intelligent NE (Host) Shelf
1.)
Access the menus for the Intelligent NE (Host) shelf by either connecting
through the front panel craft port (see DLP-715) or by Telnet session if
connected to the LAN.
2.)
From the Main Menu, select the OC-3 MUX.
3.)
From the OC-3 MUX Main Menu, select Provisioning.
4.)
From the Provisioning Menu, select OC-3 Provisioning.
5.)
Set OC-3 Transmission Sync Message to Derive From Source.
6.)
Press <Esc> to return to the Provisioning Menu and select EC-1 #1
Provisioning.
7.)
From the EC-1 #1 Provisioning Menu, set Transmission Sync Message to
Derive From Source.
8.)
Press <Esc> to return to the Provisioning Menu and select EC-1 #2
Provisioning.
9.)
From the EC-1 #2 Provisioning Menu, set Transmission Sync Message to
Derive From Source.
10.) Press <Esc> to return to the Provisioning Menu and select MUX
Provisioning.
11.) Verify that Linked Provisioning is Enabled when using redundant MUX.
12.) Set Clock Source to Receive OC-3 A & B.
13.) Select DCC Options.
14.) From the DCC Options Menu, select OC-3 DCC.
15.) From the OC-3 DCC Menu, set DCC Mode to User.
16.) Press <Esc> to return to the DCC Options Menu and select EC-1 #1 DCC.
17.) From the EC-1 #1 DCC Menu, set DCC Mode to Disabled.
18.) Press <Esc> to return to the DCC Options Menu and select EC-1 #2 DCC.
19.) From the EC-1 #2 DCC Menu, set DCC Mode to Disabled.
20.) Press <Esc> to return to the DCC Options Menu and select System ID.
21.) Enter the System ID provided by the Network Administrator.
22.) Select NSAP Area Address and enter the NSAP Area Address provided by
the Network Administrator.
