6TADLP742-1E
TOTAL ACCESS 3000/3010
DLP-742
Page 11 of 14
Total Access
®
3000/3010 System Manual
© 2003, ADTRAN, Inc.
Perform Steps Below in the Order Listed
1. From the Primary MUX Main Menu select option 8,
VT1.5 Mapping
, and press
<Enter>.
2. The factory default setting is “Remove all mappings” and renders the MUX unable
to provide service to the access slots. The available three options are described
below:
1.
Toggle Chan/Slot Display
– This option allows the user to choose how to
display the mapping. In slot mode, routing is displayed with respect to the
access slot number. In channel mode, routing is displayed with respect to
channel number.
2.
Remove all mappings
– This option removes all mappings and renders the
system unable to provide service from the OC-3 to the access slots.
3.
1-to-1 Chan/Slot mappings
– Reverts all mapping back to a 1-to-1
configuration where payload VT1.5 #1 is mapped to slot 1, payload VT1.5 #2
is mapped to slot 2, and so forth, to VT1.5 #28 to slot 28.
3. Return to the Primary MUX Main menu by pressing <Esc>.
1.7
Path Trace
Path Trace message is used for connectivity information and can be set with this
option. The available settings are listed below with a brief description of each.
1. From the Primary MUX Main Menu select option 9,
Path Trace
, and press
<Enter>.
1.
Show Path Traces
– Shows the user the trace message received from the far-
end node.
2.
Send Path Trace
– Allows user to enter the Path Trace Message sent to the
fare-end.
Select the desired option by typing the corresponding number and press <Enter>.
2. Return to the Primary MUX Main menu by pressing <Esc>.
