SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
152
1. In the left navigation bar, click
Management
>
Access Control
>
Services
. The following page appears.
2. Modify settings as needed, using the information in the following table.
3. Click
Save/Apply
to commit your settings.
The fields on this page are explained in the following table.
Field Name
Description
Services
Select the SCL services that you want to be enabled. Options are
FTP
,
HTTP
,
ICMP
,
SNMP
,
SSH
,
TELNET
, and
TFTP
.
Use encrypted HTTP(S)
Click this checkbox to implement secured HTTP.
Warning:
When you click this option, the gateway reboots.
LAN
Select the services enabled on LAN side firewall. Depending on configuration settings
made elsewhere in the GUI, this column may be read-only.
Note:
ICMP is an always-enabled service by default and has no checkbox.
WAN
If a WAN service is configured for your gateway, select the services enabled on the WAN
side firewall. If no WAN service is configured, this column does not appear.
WAN Port Number
Enter the port to which the access control applies on the WAN side for the given service.
Except where noted below, the service ports are the default ports for the WAN.
