SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
105
1. In the left navigation bar, select
Advanced Setup
>
Multicast
. The following page appears.
2. Modify the settings as needed, using the information in the table below. The same fields are provided for both IGMP and MLD
configuration.
3. To add addresses to the exception lists, in the
Group Exception List
tables, enter any additional address and mask inform-
ation and then click
Add
.
Note:
For the IGMP list, the
Group Address
must be between 244.x.x.x and 239.x.x.x. For the MLD table, the
Group Address
must be a valid IPv6 address.
4. To remove addresses from the exception lists, click the checkbox in the
Remove
column next to the address(es) and then
click
Remove Checked Entries
. The list refreshes immediately.
5. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
