SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
62
1. In the left navigation bar, click
Advanced Setup
>
NAT
>
Port Triggering
and then click
Add
. The following page appears.
2. Customize the fields as needed for the firewall pinholes you wish to establish. A maximum 96 entries can be configured.
3. Click
Save/Apply
to commit your changes. If the selected service configures multiple servers, the same number of entries are
added to the table of the NAT - Virtual Servers Setup page.
The fields on this page are explained in the following table.
Field Name
Description
Use Interface
Select the interface for which the port triggering rule will apply.
Application Name
Select or enter the application which requires a port trigger entry. Options are:
l
Select an application
: Select an application. The starting and ending IP addresses
and port numbers that are configured for the service are populated into the table at
the bottom of the page.
l
Custom application
: If the application you want does not appear in the selection
list, enter a unique name for the application for which you are creating a port trig-
ger entry. This is a free-form text field.
Trigger Port Start
Enter the starting number of the range of available outgoing trigger ports. Options are:
1
-
65535
.
