SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
145
Field Name
Description
Connection Request Port /
URL
There is typically no need to set the Connection Request URL as it is normally estab-
lished automatically based on the effective WAN IP. The port can be configured if
needed. An example value might be "http://xxx.xxx.xxx.xxx:30005/" where the xxx
values are specific WAN IP octet numbers.
The default port value is
30005
.
4. To force the gateway to attempt to sync with the ACS, click the
GetRPCMethods
button. This will assist you in verifying the
TR-069 parameters entered above.
5. Click
Apply/Save
to commit your changes.
STUN Config
STUN stands for “Simple Traversal of UDP through NATs”. STUN enables a device to find out its public IP address and the type of NAT
service it is sitting behind.
STUN is most commonly used with older modems under ACS management connected via a NAT gateway. NAT accommodates a LAN-
side device that has been allocated a Private IP address such as a CPE device on a private network behind an ONT. In this instance,
the regular CWMP Connection Request mechanism to talk to the modem gateway cannot be used to initiate a session with that ACS.
A STUN server receives STUN requests and sends STUN responses. STUN servers are generally attached to the public Internet.
On this page, when a STUN server is present within the infrastructure of the Service Provider, you can configure this gateway with
the connectivity specifics for that server.
1. In the left navigation bar, click
Management
>
Management Server
>
STUN Config
. The STUN Configuration page appears.
