ADTRAN SMART/RG SR506n User Manual Download Page 32

Page: 32 / 161

2. Select the Layer2 interface to use for the WAN service and click

Next

. The following page appears.

3. Select the

PPP over Ethernet (PPPoE)

WAN service type.

4. Modify the other settings as needed, using the information in the following table.

Field Name

Description

Enter Service
Description

Enter a name to describe this configuration.

Enter 802.1P Pri-

ority

Options are

. The default is

For tagged service, enter values in this field and the

802.1Q VLAN ID

field.

For untagged service, enter

-1

(disabled) in this field and the

802.1Q VLAN ID

field.

Enter 802.1Q

VLAN ID

Options are

4094

. The default is

-1

(disabled).

For tagged service, enter values in this field and the

802.1P Priority

field.

For untagged service, enter

-1

(disabled) in this field and the

802.1P Priority

field.

Summary of Contents for SMART/RG SR506n





























































































































































Search results

Summary of Contents for SMART/RG SR506n

Reviews:

Related manuals for SMART/RG SR506n

Brands by name

Popular brands

ADTRAN SMART/RG SR506n, User Manual

Search results

Summary of Contents for SMART/RG SR506n

Reviews:

Related manuals for SMART/RG SR506n

Brands by name

Popular brands