SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
58
1. In the left navigation bar, click
Advanced Setup
>
Ethernet Config
. The following page appears.
2. In the
Configure
column, select an option (
Auto
,
100 Full
,
100 Half
,
10 Full
or
10 Half
) for the Ethernet port on your gate-
way.
These options represent 100 megabits or 10 megabits using half or full duplex transmission protocols. When you have a spe-
cific device with a known limited transmission speed capability, select one of the latter four options. If you select
Auto
, your
gateway will automatically select an appropriate setting based on Ethernet auto negotiation with the NIC of the LAN host.
Note:
For 1000 BaseT connections, always select
Auto
.
3. Click
Save/Apply
to commit your changes.
