SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
29
Field Name
Description
Default Queue Precedence Enter a precedence for the specified queue. Options are:
1
-
8
.
Default Queue Minimum
Rate
The default minimum rate at which traffic can pass through the queue. For no shaping,
enter
-1
(disabled). Options are:
1
-
0
Kbps.
Default Queue Shaping
Rate
The shaping rate for the specified queue. Options are:
1
-
0
Kbps. The default is
-1
(no
shaping).
Default Queue Shaping
Burst Rate
The maximum rate at which traffic can pass through the queue. Options are
1600
or
greater.
ETH Interface
On this page, you can configure an Ethernet interface for your gateway.
Note:
If a WAN port is already configured, you must remove it before you can define a new one. The
Add
button does not appear
until the existing port is removed. Modify or delete any WAN service that uses it. Then, return to this page and click the
Remove
checkbox and then click the
Remove
button.
1. In the left navigation bar, click
Advanced Setup
>
Layer2 Interface
>
ETH Interface
. If no WAN port is configured, the fol-
lowing page appears.
2. Click
Add
.
3. If a WAN port is already configured or you clicked
Add
, the following page appears.
Note:
If a port is already configured, you must remove it before adding a new one. Click the
Remove
checkbox and then click
the
Remove
button.
