background image

Chapter 3: Terminal Menu Operation and Structure

61202192L1-1

Express L768/L1.5 User Manual

63

Forward All

 - All incoming packets from the WAN are not

blocked except as defined in the 

Filters/In Exceptions

 list.

Filters/In Exceptions

Write security: 2; Read security: 5
This is a list of up to 32 filter entries which can be combined using the opera-
tions field.  The operations are performed in the order they appear on the list.

Active

 - Turns this entry active when set to 

On

.

Type - 

Selects the filter define list to reference:

MAC 

-

from the 

Configuration/Security/Filter

Defines/MAC Filter Defines

 list.

Pattern 

- from 

the 

Configuration/Security/Filter

Defines/Pattern Filter Defines

 list.

IP

- from 

the 

Configuration/Security/Filter 

Defines/IP Filter Defines

 list.

IPX 

- from 

the 

Configuration/Security/Filter 

Defines/IPX Filter Defines

 list.

Filter List Name

 - Selects between filters defined in the list.

Next Oper

 - The next operation to use to combine with the next

filter in the list:

END

 -

 the last filter to combination.

AND

 -

 logically AND this filter with the next filter

in the list.

OR

 -

 logically OR this filter with the next filter in

the list.

Summary of Contents for Express L1.5


















































































































































Reviews: