ADTRAN 606, System Manual

Page: 48 / 264

Section 4 User Interface Guide Total Access 600 Series System Manual
46 © 2004 ADTRAN, Inc. 61200624L1-1B
Session Management Keystrokes
Configuration Keystrokes
Move to the bottom of a screen Z
Ascend one menu level Backspace
Jump to terminal mode CTRL+T
Jump to NAT menu CTRL+N
To do this... Press this key...
Log out of a session CTRL+L
Refresh the screen
To save time, only the portion of the screen that has changed is refreshed. This
option should only be necessary if the display picks up incorrect characters caused
by disconnecting and reconnecting the terminal session. CTRL+R
To do this... Press this key...
Restore factory default settings
This setting restores the factory defaults based on the location of the cursor. If the
cursor is on an interface line (in the
I
NTERFACES
menu), then only the selected
interface is updated to factory defaults.
F
Copy selected items to the clipboard
The amount of information you can copy depends on the cursor location when you
press <C>:
If the cursor is over an editable field, only that item is copied.
If the cursor is over the index number of a list, then all of the items in the row of
the list are copied. For example, if the cursor is over the selection # field in the
I
NTERFACES
screen, all of the information associated with the interface is
copied.
C
Paste the item stored in the clipboard, if the information is compatible
You must confirm all pastes — except those to a single editable field. P
Increment the value of certain types of fields by one when you paste information
into those fields >
Decrement the value of certain types of fields by one when you paste information
into those fields <
Save the current configuration immediately to flash memory CTRL+W
Insert a new list item
For example, add a new item to the
T
ELNET
U
SER
connection list by pressing <I>
while the cursor is over the index number.
I
To do this... Press this key...