manualshive.com logo in svg

ADTRAN 606, System Manual

The Brother 606 Operation Manual is a comprehensive guide that ensures effortless usage of the Brother 606 product. Obtain this essential manual for free download from our website, empowering you with all the necessary instructions and information needed to maximize the potential of your Brother 606.

Share
Download
background image

61200624L1-1B

© 2004 ADTRAN, Inc.

 41

USER INTERFACE GUIDE

This section of ADTRAN’s Total Access 600 Series System Manual is designed for use by network 
administrators and others who will configure and provision the system. It contains information about 
navigating the VT100 user interface, configuration information, and menu descriptions.

C

ONTENTS

Navigating the Terminal Menu   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Terminal Menu Window  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   43
Navigating using the Keyboard Keys  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   45

MAIN Menu and System Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Selecting the Appropriate Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47
Security Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   48

Menu Descriptions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

System Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   49
System Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   51
System Utility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   64
Interfaces  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   71
Interfaces (Network T1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   71
Interfaces (Network SHDSL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   75
Interfaces (Network SDSL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   76
Interfaces (Network ADSL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   77
Interfaces (DSX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   78
Interfaces (ETH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   81
Interfaces (V35). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   82
Interfaces (FXS)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   82
Interfaces (FXO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   86
L2 Protocol (TDM Firmware). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   89
L2 Protocol (TDM Firmware) – T1 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   90
L2 Protocol (TDM Firmware) – T1 Interface > PPP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   91
L2 Protocol (TDM Firmware) – T1 Interface > FRE Protocol  . . . . . . . . . . . . . . . . . . . . . . . . . . .   93
L2 Protocol (TDM Firmware) – T1 Interface > HDLC Protocol . . . . . . . . . . . . . . . . . . . . . . . . . .   98
L2 Protocol (TDM Firmware) – T1 Interface > Auto Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . .   99
L2 Protocol (ATM Firmware) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  100
L2 Protocol (ATM Firmware) – Network (NET) Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   101
L2 Protocol (ATM Firmware) – NET> ATM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   101
L2 Protocol (ATM Firmware) – Network Interface > CuMtn FRE . . . . . . . . . . . . . . . . . . . . . . .   111
L2 Protocol (ATM Firmware) – V.35 Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   113
L2 Protocol (ATM Firmware) – DSX Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   115
L2 Protocol (All Firmware) – ETH Interface > 802.3 Protocol . . . . . . . . . . . . . . . . . . . . . . . . . .   116
Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   117
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   119
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   141
DS0 Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   149

Appendices (T1 TDM Applications)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Appendices (T1 ATM Applications)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Summary of Contents for 606









































































































































































































































































Reviews:

No comments

Related manuals for 606

Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... User Manual preview
DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network...
Brand: D-Link Pages: 53
Devolo Magic WiFi mini Ek Manual preview
Magic WiFi mini Ek
Brand: Devolo Pages: 22
Kontron ePanel-C3 Technical Manual preview
ePanel-C3
Brand: Kontron Pages: 62
Idis DR-2308P Quick Manual preview
DR-2308P
Brand: Idis Pages: 18
TANDBERG 240LTO Quick Start Manual preview
240LTO
Brand: TANDBERG Pages: 2
M-system M5XSBS Instruction Manual preview
M5XSBS
Brand: M-system Pages: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Brand: Kramer Pages: 56
Kasda KE318EU User Manual preview
KE318EU
Brand: Kasda Pages: 39
Barracuda CloudGen Firewall Revision preview
CloudGen Firewall
Brand: Barracuda Pages: 8
Patton ipRocketLink 3101 Series Getting Started Manual preview
ipRocketLink 3101 Series
Brand: Patton Pages: 119
LevelOne GSW-0890 Quick Installation Manual preview
GSW-0890
Brand: LevelOne Pages: 4
Grizzly PSJ-VZ58 gen3 OEM User Manual preview
PSJ-VZ58 gen3 OEM
Brand: Grizzly Pages: 12
TRENDnet TDM-C400 User Manual preview
TDM-C400
Brand: TRENDnet Pages: 205
Allynk Technology CAG-0100 User Manual preview
CAG-0100
Brand: Allynk Technology Pages: 39
Roland JV80 Owner'S Manual preview
JV80
Brand: Roland Pages: 224
Classe Audio CT-SSP Owner'S Manual preview
CT-SSP
Brand: Classe Audio Pages: 70
Atmel SAMA5D31-EK User Manual preview
SAMA5D31-EK
Brand: Atmel Pages: 123

Brands by name

Popular brands

Load more brands