ADTRAN 1181413L2 Page 22 Installation And Maintenance Manual Download | Manualshive

Page: 22 / 100

background image

Provisioning

HDSL4 for General Distribution Installation and Maintenance Practice

12

61223HDSL4L2-5C

NOTE

The Span Power option is available on H4TU-C units only.

NOTE

The Shelf Alarm option is available on DDM+, 3192M, and 3192
H4TU-C units only.

14.Remote Provisioning

Disabled, Enabled

Enabled

15.Shelf Alarm

5

Disabled, Enabled

Enabled

1. External is used only for Kentrox shelves. Unit transmits 12-volt p-p to DSX panel. If using a shelf other than

Kentrox, use the 0-133 feet setting.

2. The forced frame format conversion (FFFC) mode sets the H4TU-C to ESF and the H4TU-R to SF. This mode

should be used to force SF (DS1 from customer) to ESF (DSX-1 to network) conversion in the absence of net-

work-provided ESF framing.

3. Latching Loopback Mode

• T1 - When optioned for T1 mode, the unit does not respond to DDS Latching Loopback codes.
• FT1 - DDS Latching Loopback operation is supported. The H4TU-C and any H4R units which are in the HDSL

circuit are treated as identical Tandem Data ports and the HTU-R is treated as a different Tandem Data port.

Note: When operating in FT1 mode and during periods of T1 loss of signal, LOS, or T1 AIS from the customer

CI, the HDSL system sends in the network direction from the HTU-C a Fractional DS1 idle signal

consisting of a repeating 7E (HEX) byte payload within a framed/unframed T1 signal. In addition,

when optioned for FT1 mode, the setting for Customer Loss Response is ignored.

4. Customer Loss Indicator

• AIS - Send AIS to network upon T1 loss of signal or T1 AIS from customer.
• LPBK - HTU-R initiates a network loopback upon T1 loss of signal or T1 AIS from customer.
• AIS/CI - HTU-R sends customer disconnect indication upon loss of signal, loss of synchronization, or receipt

of T1 AIS from customer.

Note: The CI is generated by transmitting the framing received from the network while overwriting the

payload with a repeating pattern. For applications where the DS1 is Extended Superframe, the data

link is overwritten with a Yellow Alarm that is interrupted once every second by a 100 milli-second

code burst of 7E (HEX).

5. The Shelf Alarm option is available on the DDM+ H4TU-C (P/N 1223403L2),

3192M H4TU-C (P/N 1223404L12) and 3192 H4TU-C (P/N 1223404L2) only.

Table 6. Provisioning Options (Continued)

Provisioning Option

Option Settings

Default Settings

«
...
20
21
22
23
24
...
»

Summary of Contents for 1181413L2





































































































Reviews:

No comments

Related manuals for 1181413L2

Brand: Barracuda Networks Pages: 2

Brand: Paradyne Pages: 22

Brand: Mackie Pages: 2

Brand: Mackie Pages: 5

Brand: Furuno Pages: 24

Brand: Watchguard Pages: 40

Brand: Eaton Pages: 14

Brand: Zalip Pages: 77

EtherFast LNE100TX ver. 5

Brand: Linksys Pages: 42

Brand: UTStarcom Pages: 71

Brand: NC-link Pages: 20

Brand: XtendLan Pages: 52

Brand: Isee Pages: 68

Aquaduct 240 eco

Brand: Aqua Computer Pages: 20

Brand: Chase Research Pages: 114

Brand: Intel Pages: 578

Brand: LevelOne Pages: 146

Wisenet PRN-6400DB4

Brand: Hanwha Techwin Pages: 125

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands