ADTRAN 1181413L2 Page 54 Installation And Maintenance Manual Download | Manualshive

Page: 54 / 100

background image

Control Port Operation

HDSL4 for General Distribution Installation and Maintenance Practice

44

61223HDSL4L2-5C

The System PM/Screen Report

The System PM/Screen Report option (

) offers four types of reports on performance

monitoring. Selecting a report type displays all the reports for that category on the screen at
once, which can be more efficient than accessing each menu individually.

Figure 38. System PM/Screen Report Option

Clear PM and Alarm Histories

The Clear PM and Alarm Histories option from the HDSL4 Main Menu initializes data from
performance monitoring and alarm histories. Selecting this option from the Main Menu
displays the prompt shown in

Figure 39. Clear PM and Alarm Histories

                          6.  Scratch Pad, Ckt ID, Time/Date
                          7.  Terminal Modes
                          8.  Alarm History
                          9.  Event History
                          10. System PM/Screen Report
                          11. Clear PM and Alarm Histories
                          12. Troubleshooting
                          13. Virtual Terminal Control

Selection: 10

      Enable data logging now.
Select Report Type or Press Escape to cancel:
1)  Full System/History Report
2)  Current Status Report
3)  System Configuration Report
4)  Alarm/Event History

Circuit ID:HNTSVLALHDSL4 03/09/05 09:29:45

Adtran HDSL4 Main Menu

                          1.  HDSL4 Unit Information
                          2.  Provisioning
                          3.  Span Status
                          4.  Loopbacks and Test
                          5.  Performance History
                          6.  Scratch Pad, Ckt ID, Time/Date
                          7.  Terminal Modes
                          8.  Alarm History
                          9.  Event History
                          10. System PM/Screen Report
                          11. Clear PM and Alarm Histories
                          12. Troubleshooting
                          13. Virtual Terminal Control

               This will clear the PM, Alarm, Span Status, and
             Troubleshooting Histories for all circuit elements.
                          Are you sure (Y/N)?

Selection: 11

«
...
52
53
54
55
56
...
»

Summary of Contents for 1181413L2





































































































Reviews:

No comments

Related manuals for 1181413L2

Brand: D-Link Pages: 12

Brand: Paradyne Pages: 2

Brand: Paradyne Pages: 20

Brand: Paradyne Pages: 2

Brand: Zhone Pages: 2

Brand: 3Com Pages: 16

RabbitCore RCM4400W

Brand: Rabbit Pages: 126

ControlPoint 2000

Brand: 4Home Pages: 20

Brand: Ravpower Pages: 27

Brand: 3Com Pages: 50

Brand: E-LINX Pages: 24

Brand: Z-Wave Pages: 6

Brand: LevelOne Pages: 26

Brand: IBM Pages: 64

Brand: Bailey Pages: 33

TeraBridge 5845

Brand: Proxim Pages: 4

Brand: VIA Technologies Pages: 2

MICROSPACE MSEBX800

Brand: DIGITAL-LOGIC Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands