Adtech iMASTER - A1 Series, User Manual

Page: 146 / 198

A1-User’s Manual
１４２

31.19 Stall deceleration time

Range: 0.1 ~ 10.0 Sec in 0.1 Sec

Initial value: 1.0 Sec
Program the deceleration time for rate when the VFD detects the overload
Output Currnt (A)
31.18 (Stall current limit)
0
02.01 (Final frequency reference)
Frequency (Hz)
31.19 (Stall deceleration time)
t
t

31.22 RS485 Modbus time out check enable

0: Always Running ----- Initial value

1: Only during VFD is Running
Select a time out detection mode.

Related Parameters: '31.23'

31.23 RS485 Modbus time out time

0: Disable

Range: 0 ~ 60 Sec in 1 Sec

Initial value: 0 Sec
Select a time out detection period when communication discontinues. If no
communication event occurs during this time period, a communication fault will occur.