4-5
LUBRICANT SYSTEM
•
Install the pump then tie-up the bolts.
•
The pump gear has to fit into the
shaft, then install the gear and chain.
•
Install the nut and tie-up.
Locking torque: 1.0 kg-m
•
Mounting the oil separator and tie-up
the
bolts.
•
Mounting the starting clutch gear and
starter
clutch.
•
Mounting the gasket and dowel pins.
z
Use special tool to fix the starter
clutch lock nut.
TLCT125-04
•
Mounting the R crankcase cover with
5 fixed bolts.
•
Mounting the pulsar coil and ACG.
•
Tie-up 5 bolts on R crankcase cover.
＊
Locking the bolt have to follow the
cross-wise
direction
nut
oil separator
drive gear
Oil separator
bolts
dowel pin
starter clutch ass’y
ACG coil
bolt
