15-3
STARTING SYSTEM
Check the starter clutch assembly
•
Put the starter clutch together with
drive gear to check the movement.
•
The starter drive gear can only rotate
in clock-wise direction. Counter
clock-wise rotation will fixed to hold
the clutch body.
Disassembly
•
Check the contact surface of drive
gear and rollers. Replace if damaged.
•
Measure the inside diameter of starter
drive
gear.
Working limit:
Replace
if
over
32.1mm
•
Check the needle bearing and replace
if
damaged.
•
Disassemble the starter-clutch body.
•
Check 3 springs and working surface
of the clutch body with rollers.
Replace if abnormal.
•
Measure the outside diameter of
clutch
cover.
Replace if below 27.9 mm
•
Measure the inside diameter of
starter idle gear.
Replace if over 10.1 mm
•
Measure the outside diameter of
idle gear-shaft and check the
movement between the gear and shaft.
Replace if below 9.9 mm
drive gear
needle bearing
clutch cover
starter idle gear
gear shaft
