4-4
LUBRICANT SYSTEM
•
Check the gap between the top face
of rotor and the pump body
The gap limit is 0.2 mm
Assembling:
•
Mounting the inner and outer rotor,
then install the pump shaft.
＊
When install the pump shaft, beware
the angle position match with the
inner
rotor.
•
Install the dowel pin.
•
Siting the dowel pin and the pump
cover.
•
Locking the screw.
After installed, turning the pump slightly
and confirm the function is normal.
Install:
•
Install the pump back to crankcase
＊
Installing the pump, the arrow mark
have to be toward upper position.
＊
Add the standard oil in pump then
install it.
Inner rotor
dowel pin
Outer
Pump cover
screw
Arrow mark
Oil pump