15-2
STARTING SYSTEM
STARTER RELAY
Function check
•
Remove the R body cover.
•
Turn on main switch and hold the
brake lever then press the start
bottom.
•
The starter relay will make “CLICK”
sound.
The “CLICK” sound is normal.
•
Check the function if no “CLICK”
Check
•
Remove the starter relay and connect
with battery and test meter.
•
Using full charged battery connect
with the yellow/red and green/yellow
wires of the relay.
•
When the battery connect to starter
relay, the current should pass between
2
terminals.
STARTER CLUTCH
Disassembly
•
Remove the R crankcase cover.
•
Remove the L crankcase cover.
•
Using the fixed spanner to hold the
primary drive face then remove the
nut.
•
Remove the fixed nut of starter clutch.
＊
Loose the fixed nut is in clock-wise
direction.
•
Take out the starter clutch assembly.
•
Remove the starter idle gear shaft and
the
gear.
fixed spanner
