Signal Connection
•
17
3
Signal Connection
The signal connections of all the I/O signals are described in this chapter.
Please refer the contents of this chapter before wiring the cable between the
PCI-8136M and the motor drivers.
This chapter contains the following sections:
Section 3.1 Pulse output signals OUT and DIR
Section 3.2 Voltage output signals DAC
Section 3.3 Encoder feedback signals EA, EB and EZ
Section 3.4 Voltage input signals ADC
Section 3.5 Origin signal ORG
Section 3.6 End-Limit signals PEL and MEL
Section 3.7 Emergency stop signal ESTOP
Section 3.8 Servo on signal SVON
Section 3.9 General purpose output PRDY
Section 3.9 VCC pins
Section 3.10 Open loop and closed loop connections
Summary of Contents for PCI-8136M
Page 1: ...PCI 8136M 6 Axis Motion Controller Card User s Guide ...
Page 2: ......
