Initialization & Installation
•
23
2
I n i t i a l i z a t i o n & I n s t a l l a t i o n
2.1 Software Installation
1. If you have already installed “NuDAM Administration” then skip other
steps.
2. Backup your software diskette.
3. Insert “NuDAM Administration” disc into CD-ROM:
4. Change drive to the path of CD-ROM. For example, your drive of
CD-ROM is F:, then change the drive to F:
5. Find the setup of N uDAM Administration and run it.
6. Please follow the steps of setup program then you can successful to
install the nudism Administration.
2.2 Initializing a Brand-New Module
Objective of Initializing a Brand-New NuDAM
All NuDAM modules, except NuDAM-6520 and NuDAM-6510, in a
RS-485 network must have an
u n i q u e
address ID. Every brand-new
NuDAM has a factory default setting as following:
•
Address ID is 01.
•
Baud rate is 9600 bps
•
Check-sum disable
•
Host Watchdog timer is disable
Therefore, to configure the brand-new NuDAM before using is
necessary to avoid conflicting address. The baud rate may also be
changed according to user‘s requirements.
The initialization procedures of a brand-new NuDAM are shown in the
following sections. The procedures are applicable for initializing
Summary of Contents for NuDAM-6017
Page 2: ......
