ADLINK Technology AMP-204C, User Manual

Page: 96 / 193

Motion Control Theory 82
AMP-204C / AMP-208C
• Relevant axis parameters setup
Figure 4-8: Home mode 0 (Case: ORG)
Axis parameters
Axis
parameter
values
Description to axis parameter value
PRA_HOME_MODE 0 Employing home mode 0 (homing by ORG signal)
PRA_HOME_DIR 0 Homing by moving forward in positive direction
PRA_HOME_EZA 0 Further align with signal EZ, 0: No, 1: Yes
PRA_HOME_S 0 S-curve factor
PRA_HOME_ACC ACC
Acceleration and deceleration in unit of (distance unit of
measure/sec.
2
)
PRA_HOME_VS VS Initial speed in unit of (distance unit of measure/sec.)
PRA_HOME_VM VM
Speed of original postion searching in unit of (distance
unit of measure/sec.)
PRA_HOME_VO VO Homing speed in unit of (distance unit of measure/sec.)
PRA_HOME_SHIFT 0
Shift amount of final homing position against alignment
signal (disantace unit of measure / pulse)
Condition B
Condition A
Initial
position
Home position
Home
position
Initial position
Condition C
VM:
Home searching speed
VO:
Home approaching speed