Adimec Camera Link OPAL Series, Operating And Users Manual

Page: 71 / 86

OPERATING AND USER MANUAL OPAL FAMILY
71
OPTION: AEC/VEM
The default values for VEM operation are selected as best trade-off between applied enhancement and
noise. It is best to keep this default setting.
If noise becomes an issue, than parameter VEM maximum AGC gain might be decreased in order to
have less overall gain.
AEC commands 10.3
All parameters in which the camera differs from the standard camera will be discussed in this chapter.
For all parameters goes: where applicable the default setting is underlined.
Auto exposure control commands 10.3.1.
All commands with a question mark are query commands, obtaining information from the camera. All
other commands are commands with which a certain parameter is set. For all parameters goes: where
applicable the default setting is underlined.
Enabling AEC (AIC & AGC) 10.3.2.
Automatic gain control (AGC) and automatic integration time control (AIC) can be enabled
independently.
Command syntax: AGCx
Where x=0: AGC disabled
x=1: AGC enabled
Command syntax: AGC?
Reply: x
Where x: as above
Command syntax: AICx
Where x=0: AIC disabled
x=1: AIC enabled
Command syntax: AIC?
Reply: x
Where x: as above