Adimec Camera Link OPAL Series, Operating And Users Manual

Page: 33 / 86

OPERATING AND USER MANUAL OPAL FAMILY
33
MANAGING CAMERA SETTINGS
Obtaining the camera build state 6.7
The camera issue and firmware revisions can be obtained from the camera by means of the Build
State command..
Command syntax: BS?
Reply message: “x.xx;y.yy;z.zz
Where x.xx stands for camera issue, y.yy indicates the microcontroller fimware version and z.zz
indicates the FPGA firmware version.
NOTE: When requesting support on some features of the camera, Adimec may request the build state
information, including firmware versions, in order to optimize support.
User storage 6.8
Up to 16 user-defined strings and 16 user-defined signed integers can be stored in the camera for user
reference. These parameters do not have any effect on camera performance.
Setting one of the 16 user integers is done by means of the USI command
Command syntax: USIx;y
Where x = user integer index [0…15]
y = user integer value.
Reading back one of the 16 user integers is done by means of the USI? command
Command syntax:USI?x
Reply message: y
Where x = user integer index [0…15]
y = user integer value.
Setting one of the 16 user strings is done by means of the USS command
Command syntax: USSx;”y
Where x = user string index [0…15]
y = user string value (maximum length is 32 characters).
Reading back one of the 16 user strings is done by means of the USS? command
Command syntax for readback:USS?x
Reply message: y
Where x = user string index [0…15]
y = user string value.