Adimec Camera Link OPAL Series, Operating And Users Manual

Page: 27 / 86

OPERATING AND USER MANUAL OPAL FAMILY
27
CONTROL OF THE CAMERA
Camera control tab 5.2.4.
Function CONTROL
Exposure select
In the frame Exposure select, the method of controlling the
exposure start trigger can be selected. This can be done
by each and every one of the CC1..CC4 of the Camera Link
connector or the external trigger input on the I/O-connector.
More information can be found in chapter 7
Exposure event
Determines the activation of exposure on rising or falling
edge.
Frame start select
In the frame Frame start select, the method of controlling
the frame start trigger can be selected. This can be done
by each and every one of the CC1..CC4 of the Camera Link
connector, a soft request or the external trigger input on the
I/O-connector. More information can be found in chapter 7.
Frame start event
Determines the start of read out on rising or falling edge.
Flash strobe tab 5.2.5.
Function CONTROL
Mode of flash strobe operation
In automatic mode the flash strobe output will be active
during the integration of the image. When set to manual, the
behaviour of the flash during exposure can be programmed.
Flash strobe output
The flash strobe output can be enabled if the option is se-
lected. The output can reverse polarity when selected.
Flash strobe delay
If manual mode is selected, the start delay of the strobe
output can be set by the slider.
Flash strobe duration
If manual mode is selected, the active duration of the strobe
output can be set by the slider.