Adimec Camera Link OPAL Series, Operating And Users Manual

Page: 72 / 86

OPERATING AND USER MANUAL OPAL FAMILY
72
OPTION: AEC/VEM
Controlling AEC setpoint and measurement window 10.3.3.
Setpoint and window are common for AGC and AIC and can be altered with the AECSP (setpoint) and
AECWIN (window) commands respectively.
Command syntax: AECSPx
Where x= 0 .. 4095
NOTE: x= 0 : setpoint at absolute black
x= 1024: setpoint at 1/4 x Full Scale
x= 4095: setpoint at Full Scale
Command syntax: AECSP?
Reply: x
Where x: as above
Command syntax: AECWINx;y;w;h
Where x = 0 .. left side of window/HBIN factor
y = 0 .. top of window/VBIN factor
w= 2 .. width of window/HBIN factor
h= 2 .. height of window/VBIN factor
Command syntax: AECWIN?
Reply: x;y;w;h
Where x, y, w and h as above
NOTE:
1) Values are automatically adjusted if needed to correct values. All values are rounded to even values.
2) After an ROI command, the AEC window will automatically be changed to the ROI-values.
3) The AEC setpoint is also the setpoint for VEM.
Controlling AEC Peak / Average balance 10.3.4.
the balance between peak and average can be set by the AECPAB command.
Command syntax: AECPABx
Where x= 0 .. 256
NOTE: x= 0 : completely average
x= 256 : completely peak