Rapid View Operation Guide
Page 43 © Ademco Video 2002 MNRDVO250602US
Chapter 5
Note:
Once a Privacy Zone has been defined it cannot be
redefined from the normal operation of the
keyboard, for example, if preset 100 has been
defined as a Privacy Zone then later you try to
redefine it from normal operation, then this will
cause the keyboard to sound an error beep. To
redefine a Privacy Zone you first have to turn the
Privacy Zone off via the Privacy Zone Menu, define
the new preset, then reselect it as a Privacy Zone.
11.6
Additional Points to Remember About Privacy
Zones
If the RapidView memory is reset, by removing the battery link, the
camera will still have Privacy Zones defined. Entering the RapidView
‘Privacy Zone’ menu will show that there are no ‘Privacy Zones’
defined, i.e. they will all show the default setting of ‘PRESET’. To
remove the Privacy Zones you must set each Privacy Zone to
‘PRIVACY’, then back to ‘PRESET’.
If the number of Privacy Zones on the screen becomes too complex
the camera will compensate by grouping the Privacy Zones into a
single Privacy Zone.
12.0
Mimic Tours (Learn Mode)
This feature allows you to ‘record’ a sequence of keyboard commands
that can be played back. This is similar to programming a tour, but has
the extra flexibility of being able to define a particular path instead of
using a sequence of presets. Other features can also be incorporated
into the mimic i.e. you can add 180 degree turns, add presets, close
and open the iris and focus near or far at particular points etc.
The mimic can store 4 user-defined tours. Each of these tours can be
approximately 3 minutes in length.
Note:
Tours and mimic tours cannot be incorporated into
another mimic tour.
Summary of Contents for RapidView
Page 1: ...Document Number MNRDVO250602US RapidView Operation Guide ...
Page 55: ......
