Rapid View Operation Guide
Page 27 © Ademco Video 2002 MNRDVO250602US
Chapter 5
Option ‘NO-IR’ - This version is intended for use in a CCTV system
that has no ‘IR’ illumination. When the camera is displaying a
COLOR picture, integration will automatically be selected as the
illumination reduces. When the final step of integration setting has
been reached, the camera will automatically select MONO integration
to take advantage of the higher sensitivity MONO integration mode.
When the light level increases, the camera will automatically change
back to COLOR integration.
Note:
The IR/NO-IR option is used only with mono/color
Change Over RapidDomes.
AUTO-180 - YES enables the auto-180 feature for the associated cam-
era. When tilting down, as soon as the end stop is reached, the camera
will automatically turn through 180°.
AUTO-180 - NO disables the auto-180 feature for the associated
camera.
If no item is to be selected, or set-up of cameras has been completed,
press the ‘LOCK’ button to return to the ‘MAIN’ menu. Then press
‘LOCK’ again to return the RapidView to normal operation.
7.0
To Set Active Alarms
Use the joystick while on the ‘MAIN’ menu of monitor 1, to select
‘EDIT ALARMS’. (See Figure i The Main Menu‚ on page 19) and
press the ‘AUX’ button.
The monitor now displays the ‘SET ACTIVE ALARMS’ menu as
shown overleaf.
Summary of Contents for RapidView
Page 1: ...Document Number MNRDVO250602US RapidView Operation Guide ...
Page 55: ......
