Rapid View Operation Guide
Page 11 © Ademco Video 2002 MNRDVO250602US
Chapter 3
Press button ‘3’, then press the ‘PRESET’ button. (This selects
the third preset in ‘Tour 2’.)
Press button ‘2’, then press the ‘180°’ button. (This defines 2°/
sec to this preset position.)
Release the ‘AUTOPAN’ button.
The tour is now set up. To operate ‘Tour 2’
Press button ‘2’, then press the ‘AUTOPAN’ button.
Note:
The range of speeds that can be selected goes from
‘1’ = 1°/sec up to ‘100’ = 100°/sec. To select the
maximum seek speed, press ‘0’.
6.0
To Vary the Standard Speeds and Dwell
Times of a Tour
For example, to define a tour (As set in 5.0, above.) in memory as
‘Tour 3’ with different Dwell times between preset positions.
Press button ‘3’, then press and hold the ‘AUTOPAN’ button.
(This will define ‘Tour 3’.)
Press button ‘1’, then press the ‘PRESET’ button. (This selects
the first preset in ‘Tour 3’.)
Press button ‘5’, then press button ‘0’, then press the ‘180°’
button. (This defines 50°/sec to this preset position.)
Press button ‘1’, then press button ‘0’, then press the ‘TIME’
button. (This defines 10 second dwell time at this preset
position.)
Press button ‘2’, then press the ‘PRESET’ button. (This selects
the second preset in ‘Tour 3’.)
Press button ‘1’, then press button ‘0’, then press button ‘0’,
then press the ‘180°’ button. (This defines 100°/sec to this
preset position.)
Press button ‘1’, then press button ‘6’, then press the ‘TIME’
button. (This defines a 16 second dwell time at this preset
position.)
Press button ‘3’, then press the ‘PRESET’ button. (This selects
the third preset in ‘Tour 3’.)
Press button ‘2’, then press the ‘180°’ button. (This defines 2°/
sec to this preset position.)
Summary of Contents for RapidView
Page 1: ...Document Number MNRDVO250602US RapidView Operation Guide ...
Page 55: ......
