Rapid View Operation Guide
Page 37 © Ademco Video 2002 MNRDVO250602US
Chapter 5
10.2.3 Camera Reset.
The Camera Reset function will only reset the camera module and not
the whole Microsphere. This feature is not available if data in the
video is being used. It is only available when the RS485 control is
used.
Note:
This function will only work with Microspheres
fitted with x12 and x18 zoom lens. Programmed
presets / tours will not be lost.
This feature is found by entering ‘4’, ‘1’, ‘4’, ‘1’, ‘LOCK’. This will
display the Engineer’s Menu, as shown in Figure x. the ‘ADJUST
SYNC’ menu option will be flashing.
Select the remote reset option via the joystick then press ‘AUX’ to
enter the remote reset menu, then ‘AUX’ again to toggle through to the
the ‘CAMERA RESET’ option. Select this and the screen will change
as shown in Figure xiii.
Summary of Contents for RapidView
Page 1: ...Document Number MNRDVO250602US RapidView Operation Guide ...
Page 55: ......
