Additel ADT286, User Manual

Page: 115 / 129

114
7) Sampling speed: fast, medium and slow speed.
8) Recording times: set the number of records, manually input.
9) Temperature source: Select a temperature source to connect.
4.3.2 Switch Test Process
After setting, click the Save button in the lower right corner to enter the switch test page for switch test.
1) The CH1-01 channel of the process scanner is used to measure the reference sensor and other channels
are for the DUTs.
2) The switch test interface loads all the channels and the corresponding scan data of each channel switch
when open and close is displayed in the table.
3) After the switch test is completed, click the save button on the right toolbar to save the switch test data.
4.3.3 Data Management
See 3.8 data management.