Additel ADT286 User Manual Download Page 102

Page: 102 / 129

101

3.6.3 Factory settings data reset

The device provides the function of restoring factory settings. To enable this function, you need to input a

password. The factory default password is: 123456.



Restoring the factory settings will not have any impact on the calibration settings. To restore the factory

calibration, this must be restored in the calibration menu.



After resetting the factory settings and restarting the unit, the user needs to set the time. For details, please

refer to chapter 3.5.1 Date Time.

3.6.4 System Upgrade

The device provides firmware upgrade. The upgrade requires U disk (USB drive) The U disk format needs to be

FAT16 or FAT32.

Upgrade operation

1. Copy the upgrade file to the root directory of the USB flash drive. This file can be found at www.additel.com

2. After booting, insert the USB flash drive into the USB port on the front of the thermometer

Summary of Contents for ADT286


































































































































Search results

Summary of Contents for ADT286

Reviews:

Related manuals for ADT286

Brands by name

Popular brands

Additel ADT286, User Manual

Search results

Summary of Contents for ADT286

Reviews:

Related manuals for ADT286

Brands by name

Popular brands