ADC Campus-REX2 RS, User Manual

Page: 93 / 166

Chapter 5 - Monitoring and Testing the Campus System
Campus-REX2 RS Interface Card User Manual 81
Viewing Bridge Statistics
From the REX2 Configuration and Status screen with Bridge selected as the
network protocol, type
then press .
The Bridge Statistics screen is displayed.
The following information is displayed for the unit:
•
Entries learned indicates the number of entries learned on a port and that
are added to the bridging table.
•
Creation failures indicates the number of entries not added to the
bridging table because the table was full.
5 ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Local I/F: REX2
Remote Unit ID: Inactive Remote I/F: Inactive
Circuit ID: Southeast line 421
BRIDGE STATISTICS
UNIT Entries Learned: 1 Creation Failures: 0
PORTS LAN TX LINE RX LAN RX LINE TX
Frames: 0000000000 0000000000 0000000893 0000000840
Multicasts: 0000000000 0000000000 0000000000 0000000000
Bridge Frames: 0000000000 0000000000 0000000525 0000000000
Discards: ---------- 0000000000 0000000000 ----------
Errors: 0000000000 0000000000 0000000000 0000000000
Undersized: ---------- 0000000000 0000000000 ----------
Oversized: ---------- 0000000000 0000000000 ----------
Ex. Delay: 0000000000 ---------- ---------- 0000000000
Ex. Collisions: 0000000000 ---------- ---------- 0000000000
(R)eturn (M)ain Menu (U)pdate (C)lear
ENTER CHOICE>