ADC Campus-REX2 RS, User Manual

Page: 66 / 166

Chapter 3 - Configuring the REX2
54 Campus-REX2 RS Interface Card User Manual
2 To select DHCP Relay, type then press . The following fields,
2 and 3, are added to the screen as shown below.
3 To enter the IP address for the primary DHCP server to which the
Campus-REX2 relays requests, type
then press . At the
prompt, enter the IP address.
Required format is nnn.nnn.nnn.nnn
Enter Primary DHCP Server:10.0.0.26
To delete a DHCP server, enter the IP address 0.0.0.0. If the primary
DHCP server is deleted and a valid secondary DHCP server is defined,
the secondary DHCP server automatically becomes the primary DHCP
server.
4 To enter the IP address for the secondary DHCP server to which the
Campus-REX2 relays requests, type
then press . At the
prompt, enter the IP address.
Required format is nnn.nnn.nnn.nnn
Enter Secondary DHCP Server:192.150.0.54
To delete a DHCP server, enter the IP address 0.0.0.0. If the primary
DHCP server is deleted and a valid secondary DHCP server is defined,
the secondary DHCP server automatically becomes the primary DHCP
server.
5 Type then press to return to the Router Configuration screen
( page 3-46 ). (Typing will return you to the Main Menu.)
1 ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Local I/F: REX2
Remote Unit ID: Remote I/F: REX2
Circuit ID:
DHCP SERVICES
1) Service: Relay (None, Relay)
2) Primary DHCP Server: 0 .0 .0 .0
3) Secondary DHCP Server: 0 .0 .0 .0
(R)eturn (M)ain Menu
ENTER CHOICE>
2 ENTER
3 ENTER
R
ENTER
M