ADC Campus-REX2 RS, User Manual

Page: 129 / 166

Chapter 7 - Using the LCD for Configuration and Management
Campus-REX2 RS Interface Card User Manual 117
•
number of frames received and transmitted
•
number of multicast frames received and transmitted
•
number of errored frames received and transmitted
•
number of undersized frames received
•
number of oversized frames received
•
number of excessive delay events for transmitted frames
•
number of excessive collision events for transmitted frames
•
number of bridge frames received and transmitted (Bridge only)
•
number of frames received that were discarded (Bridge only)
Bridge Port Statistics
To view the Bridge Port Statistics:
1 Press Escape until
CAMPUS RS I/F: REX2
is displayed.
2 Press Next until
REX2 CONFIG & STATUS
is displayed.
3 Press Enter.
CONFIGURE REX2 SETTINGS
is displayed.
4 Press Enter.
NETWORK PROTOCOL = Bridge
is displayed (if not,
you must change the setting to
Bridge
to view Bridge Port Statistics).
5 Press Next until Bridge
STATISTICS
is displayed.
6 Press Enter.
FRAMES
is displayed.
7 Press Enter to display the first screen of statistics.
8 Press Next to display the second screen of statistics (if any).
9 Press Escape to return to the statistics title screen.
10 Press Next to advance to the remaining statistic items, displayed in order:
MULTICASTS
,
BRIDGE FRAMES
,
DISCARDS
,
ERRORS
,
UNDERSIZED
,
OVERSIZED
,
EX. DELAY
, and
EX. COLLISIONS
.
Repeat steps 7-9 as desired to display the statistics.
11 To clear the statistics, press Next until
Press ENTER to Clear
Statistics
is displayed. Press Enter to reset all statistics to zero.