ADC Campus-REX2 RS, User Manual

Page: 28 / 166

Chapter 1 - Installing and Accessing the REX2
16 Campus-REX2 RS Interface Card User Manual
L
OGGING
O
FF
From the Main Menu, type then press to logout of the unit menus.
If the Main Menu is not the current menu, type or (when available) then
press to return to the Main Menu where you can logout as described
above. The logout procedure is the same whether you are connected to the
console port or through a telnet session.
U
SING THE
M
ENUS
The bottom of each menu screen identifies all of the keys you can use on that
screen. Several keys operate identically on all of the menu screens:
Configure options as described below:
To: Do this:
Access menu items Type the number of the item then press .
Return to the previous menu Type then press .
Return to the Main Menu Type then press when the menu is more
than one level below the Main Menu.
Clear or update status
information • Type then press to clear or reset the
information on a status screen.
•
Type then press to update the
information on a status screen.
For this option type: Do this:
Select a value from a list of
predefined values 1 Type the number of the option then press .
The option setting changes to the next value in the
list and the screen redraws.
2 Repeat the first step until the option is set to the
preferred value.
Type in required information 1 Type the number of the option then press .
The screen prompts you for information.
2 Type the information in the format requested then
press .
L
ENTER
R
M
ENTER
ENTER
R ENTER
M ENTER
C
ENTER
U
ENTER
ENTER
ENTER
ENTER