ADB EURODIM TWIN TECH, Installation Manual

Page: 128 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 26
Issue 1.1
Several sub-menus are available:

Cue - Edit: Enter the cue content

Cue - Capture: Capture the DMX/ARTNET signals in a cue

Cue - Play: Control the circuits by playing a cue

Cue - Copy: Copy the content of one cue to another cue

Cue -
Erase: Erase a cue‟s content

Cue - PRIOR. DMX FAIL: Select a source to replace a absence of DMX/ARTNET

Chaser - Play all existing cues on loop
19. Cues Menu - Edit
This function is used to fill in the content of the 80 cues + cue 0. A control intensity is allocated to
each of the 128 circuits constituting the cabinet.
The sign "E" signifies that the cue exists and that it may be played. See "PLAY" sub-menu.
A cue can be made existing or non-existing. If it is non-existing, it may not be played and will not
be included in the chaser. See "Time/Exist" key.
Cue "0" always exists but it will not be played in the chaser.
Selecting a cue
To select a cue to be edited position on the cue number (highlighted), either by touching the screen
or using the wheel.
Cue
number
Existing
cue