ADB EURODIM TWIN TECH, Installation Manual

Page: 134 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 32
Issue 1.1
22. Cues Menu - Copy
This function is used to copy an existing cue to any other cue (existing or not).
Selecting the original cue
The field memory source can only display existing memories .
Note : Cue 0 always exists.
To select a cue, position on the cue number (highlighted), either by touching the screen or using
the wheel.
To edit the cue number:

Touch the screen or use the wheel to select the zone of the number in question,

Type the number using the keyboard,

Validate the cue by touching the screen to select the zone in question, or using the wheel.
Otherwise, press keyboard key 1 to scan the cues in ascending order, or press keyboard key 0 to
scan the cues in descending order.
Selecting the destination cue
Each of the cues may be overwritten.
To select a cue, position on the cue number (highlighted), either by touching the screen or using
the wheel.
To edit the cue number:

Touch the screen or use the wheel to select the zone of the number in question,

Type the number using the keyboard,

Validate the cue by touching the screen to select the zone in question, or using the wheel.
Existing
source cue
destination cue
indication