ADB EURODIM TWIN TECH, Installation Manual

Page: 155 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 53
Issue 1.1
35. ARTNET Patch Menu
This function is used to configure a patch on a circuit or a set of circuits for each of universes 1, 2
and 3.
This configuration is used to attribute the value of a channel of each universe to the control of a
circuit of the cabinet.
Reminder
The referencing of the modules in the cabinet starts at 1 in relation to the first location situated at
the top of the cabinet, up to 32.
The left-hand column contains the referencing of the modules and circuits present in the cabinet:

Example: Value 1/1: references module 1/circuit 1 of the module

The right-hand figure indicates the output on the cabinet (from 1 to 128).
The channel attributed for each universe is given in the right-hand column.
Start by selecting universe 1, 2 or 3.
Use the wheel to rapidly move between all the rows of the patch. The row selected is highlighted.
To attribute a channel, position on a row and use:

The touch-screen and the numeric keyboard to enter a value,

Press key 1 directly to increment the value by 1 (between 1 and 512) in relation to the first
value available on a previous row,

Press key 0 directly to decrement the value by 1 (between 1 and 512) in relation to the first
value available on a previous row,

The Range key in order to enter values between two circuit references.
Module
reference
Universe
channel