ADB EURODIM TWIN TECH, Installation Manual

Page: 126 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 24
Issue 1.1
When the key is selected, two messages can be displayed:

"Ref. and present modules are identical": In this case, there is no module identification
problem,

"Ref. and present modules are different". The message also displays the number of
different modules. When the "OK" button is touched, the screen automatically displays the
first module where the ID is different. In this case, it is necessary to verify the identification
of the module physically present in the cabinet and, if necessary, modify the ID in the
"REFERENCE" column.
17.2 REF.

PRES. Key
This function is used to copy the content of the IDs of the PRESENT column to the REFERENCE
column, for all the modules.
Attributing an ID
To attribute an ID to a module in the REFERENCE column, position on the module using the
wheel:

Touch the module zone, leading the module ID table to appear,

Touch to select a reference from the table; the reference selected is highlighted,

Touch the highlighted reference to validate and attribute to the module.
17.3 Range Key
Used to attribute the same ID to a set of modules, included within a range.