4.5 Unpacking the Unit
To reduce the possibility of damaging the light assembly, unpack the light fixtures at the installation site. If damage to any
equipment is noted, file a claim form with the carrier immediately.
When receiving the light fixture, open the box and verify that the characteristics of the light fixture correspond to the design
requirements, such as type, color etc. When installing a light fixture where the control and monitoring function is to be
activated at a later stage, make sure to register product information, such as PID/SN and position of the light fixture in, for
example, a site documentation table. The information is required for remote activation and administration of control and
monitoring functionality from a substation.
UM-5056, Rev. 1.0.17, 2022/12/08
21
Copyright
©
ADB Safegate, All Rights Reserved
Summary of Contents for AXON FAA L-852A
Page 2: ...UM 5056 Rev 1 0 17 2022 12 08 ...
Page 98: ......
