4.3.6 Verify Input Requirements and Equipment Needed
The In-pavement light fixture is designed for connection to a 6.6A or 20A series lighting circuit via an L
‑
830 (60 Hz) or L-831
(50 Hz) isolation transformer.
Make sure you have the necessary tools and materials ready for installation (not supplied). Also consider other tools that
might be needed based on site-specific conditions.
Table 1: Suggested Tools and Materials for Installation and Repair
Qty.
Description
Qty.
Description
1
Torque wrench
1
Set of screwdrivers, one with 3/8" (9.525mm) minimum
blade width
1
Alignment jig
1
Diamond-faced core drill
As needed
Silicone grease
1
Diamond-faced saw, 3/8" (9.525mm)
thick
As needed
Joint sealing filler
1
Crimping tool
1
Pressure test fitting assembly
1
Small water suction pump
As needed
Dow Corning Molykote
®
3452 or equal (P/N 67A0095) -
used on top cover prism seal
2
Eyebolts, 3/8 inch (9.525mm) diameter
1
Lifting rod, 16 inches (406mm) long
As needed
Novagard
®
Silicone Versilube
®
G322L
™
(P/N 67A0009)
- used on O-ring between top cover and inner pan
assembly; also may be applied to four nipples of inner pan
assembly to install optical assembly
1 or 2
L-830 / L-831 isolation transformer
1
Set of fiber brushes
1
Set of socket wrenches, 1/2" (12.7mm)
drive
4.3.7 Unpacking the Unit
To reduce the possibility of damaging the light assembly, unpack the light fixtures at the installation site. If damage to any
equipment is noted, file a claim form with the carrier immediately.
When receiving the light fixture, open the box and verify that the characteristics of the light fixture correspond to the design
requirements, such as type, color etc. When installing a light fixture where the control and monitoring function is to be
activated at a later stage, make sure to register product information, such as PID/SN and position of the light fixture in, for
example, a site documentation table. The information is required for remote activation and administration of control and
monitoring functionality from a substation.
UM-5056, Rev. 1.0.17, 2022/12/08
19
Copyright
©
ADB Safegate, All Rights Reserved
Summary of Contents for AXON FAA L-852A
Page 2: ...UM 5056 Rev 1 0 17 2022 12 08 ...
Page 98: ......
