33
8.6 Menu
settings
8.6.1
Switch over weighing units (Unit) (only non NTEP appliances)
The weighing units are switched on or off via the menu.
Activate Function. :
Switch-over weighing unit :
By pressing the key in the weighing mode it is possible to switch between the activated units.
MODE
MODE
MODE
Operation
Balance Display
•
Start balance by pressing
As long as the balance carries out a self test, press .
“F1 Unt” is displayed.
•
Press
Weighing unit is switched on or off.
•
Use to switch weighing unit on or off
•
Using change to the next unit.
6
3 Basic Safety Precautions
3.1 Pay attention to the instructions in the Operation Manual
Carefully read this operation manual before setup and commissioning, even
if you are already familiar with ACZET balances.
Versions in other languages are non-binding translations. The only binding
version is the original document in German.
3.2 Personnel training
The appliance may only be operated and maintained by trained personnel.
4 Transportation & Storage
4.1 Testing upon acceptance
When receiving the appliance, please check packaging immediately, and the appliance itself when
unpacking for possible visible damage.
4.2 Packaging / return transport
•
Keep all parts of the original packaging for a possibly required return.
•
Only use original packaging for returning.
•
Prior to dispatch disconnect all cables and remove loose/mobile parts.
•
Reattach possibly supplied transport securing devices.
•
Secure all parts such as the glass wind screen, the weighing platform,
power unit etc. against shifting and damage.
