17
5.9
Position of seals and adjusting switch:
1. Adjustment
switch
2.
Plastic disk to cover the adjustment switch
3. Self-destroying
seal
mark
4.
Self-destroying seal mark
7.2.2 NTEP
models
• Press , the zero display appears.
The pictogram is displayed.
The pictogram goes out.
The weight of the container is now internally saved.
• Place goods to be weighed in the weighing container.
The net weight of the goods to be weighed is displayed.
Operation
Balance Display
• Put on weighing container.
The weight of the container is displayed.
• The weight of the weighing container will be displayed as a minus
number after removing the weighing container.
Tare
0
0
• The tare weight is saved until it is deleted. Remove the load from
the balance and press . The zero display appears, the pictogram
goes out and will be displayed again.
Tare
NET
NET
22
