background image

7

5.Unpacking, Setup and Commissioning   

5.1 Installation 

Site, 

Location 

of 

Use 

The balances are designed in a way that reliable weighing results are achieved in common 
conditions of use. 
You will work accurately and fast, if you select the right location for your balance. 

Therefore, observe the following for the installation site: 

• Place the balance on a firm, level surface; 
•  Avoid extreme heat as well as temperature fluctuation caused by installing next to a 

radiator or in the direct sunlight; 

•  Protect the balance against direct draughts due to open windows and doors; 
•  Avoid jarring during weighing; 
•  Protect the balance against high humidity, vapors and dust; 
•  Do not expose the device to extreme dampness for longer periods of time. Non- permitted 

condensation (condensation of air humidity on the appliance) may occur if a cold appliance is 
taken to a considerably warmer environment. In this case, acclimatize the disconnected 
appliance for ca. 2 hours at room temperature. 

•  Avoid static charge of goods to be weighed or weighing container. 

Major display deviations (incorrect weighing results) may be experienced should electromagnetic 
fields (e.g. due to mobile phones or radio equipment), static electricity accumulations or instable 
power supply occur. Change location or remove source of interference. 

5.2 Unpacking 

Carefully remove the balance from the packaging and setup balance at the intended workstation.

32

8.5  Menu Map (NTEP models)

Operation

Balance Display

Not available 

Background lighting on/automatic/off 
• EL on: background lighting on 
• EL Au: background lighting switches on automatically 
• EL off: background lighting off 

RS -232 interface 
S 232:

• P Prt: connect with printer 

• b XXXX: Baud rate can be selected between 9600, 600, 1200, 

2400, 4800 

• LP-50: not documented 

EnG: Selection of Language English 

 •

Chi: 

Selection 

of 

Language 

Chinese 

• tP: Standard printer setting 

• P Cont: Continuous printout 
• P AUto: autom. Printout 
• P ASk: Data output via remote control commands 

S USb: not documented 

Summary of Contents for CZ 1201














































Reviews: