7.2 Taring
The dead weight of any weighing container may be tared away by pressing a button, so that the
following weighings show the net weight of the goods to be weighed.
7.2.1 Non NTEP models
• Press , the zero display appears.
The pictogram is displayed.
The pictogram goes out.
The weight of the container is now internally saved.
• Place goods to be weighed in the weighing container.
The net weight of the goods to be weighed is displayed.
Operation
Balance Display
• Deposit weighing receptacles.
The weight of the container is displayed.
• The weight of the weighing container will be displayed as a minus
number after removing the weighing container.
Tare
T
0
T
0
• The tare weight is saved until it is deleted. Remove the load from
the balance and press . The zero display appears, the pictogram
goes out and will be displayed again.
Tare
21
Tare
MODE
Key
1
2
3
4
5
6
7
[ON/OFF]
[ZERO]
[TARE]
[%]
[PCS]
[MODE]
[PRINT/ESC]
Designation
Function
• Turn on/off
• Set weight display at zero
• Activate the current element in the menu
• Select in Weighing units (menu F UNIT): change to the
next unit
• Call-up %-function
• In the percent mode back to weighing mode
• Only % function
• Call-up parts counting mode
• In the piece count mode back to weighing mode
• Print out weighing result
• Exit menu (jumping back to weighing mode)
• Weighing units switch-over;
• At weighing unit switch-over (menu „F UNIT“): Set
weighing unit on/off
• Counting up in parts counting mode
• Select menu and pass through menu items from top to
bottom
• Changing readability
• Taring
18
6. Controls
6.1 Keyboard
overview
MODE
